Sometimes, you may want to know the hardware speed limit for network interface cards and disks.
Network Interface Card
I use commands
dmesg | grep -i ethernet dmesg | grep -i infiniband
The output looks like
Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2-1 igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connectionand
mlx4_ib: Mellanox ConnectX InfiniBand driver v1.0 (April 4, 2008) Registered RDS/infiniband transport
I also use command
/sbin/lspciThe output has following useful information
0b:00.0 Ethernet controller: Intel Corporation 82575EB Gigabit Network Connection (rev 02) 0b:00.1 Ethernet controller: Intel Corporation 82575EB Gigabit Network Connection (rev 02) 10:00.0 InfiniBand: Mellanox Technologies MT26418 [ConnectX VPI PCIe 2.0 5GT/s - IB DDR / 10GigE] (rev a0)
Disk
/sbin/lspci | grep -i ata
Other useful tools
mii-tools
hdparm
They need root privilege usually.
Posts
1 comment:
The manual DOS command via command prompt is the easiest way to do, like what you have shared. This is a very useful display function for next base setup.
document storage
Post a Comment